One Day Deal 16 AWG Black – 100 foot

Pacer WUL16BK-100 16 AWG Primary Marine Wire is a black UL-listed tinned copper marine wire supplied in a 100 ft spool, designed for point-to-point wiring and internal wiring of panels, motors, and marine electrical systems.

Pacer 16 AWG Primary Marine Wire is designed for marine electrical installations that require flexibility, corrosion resistance, and dependable performance. It uses Type III Class K fully annealed finely stranded tinned copper, helping the conductor resist corrosion while remaining flexible for tight routing inside boats, panels, and equipment compartments.

This black 16 AWG wire features a tough, flexible, color-coded PVC insulation for demanding marine environments. Pacer’s primary marine wire spec sheet lists this wire family for point-to-point wiring and internal wiring of panels and motors, with resistance to acid, alkali, oil, moisture, abrasion, gasoline, and flame.

Key Features

• 16 AWG primary marine wire
• Black insulation
• Supplied in a 100 ft spool
• UL-listed marine wire
• Type III Class K annealed finely stranded tinned copper conductor
• Tinned copper helps resist corrosion in marine environments
• Highly flexible for tight spaces and enclosed wiring runs
• Tough, flexible PVC insulation
• Color-coded jacket for easier circuit identification
• Designed for point-to-point wiring and internal wiring
• Resistant to acid, alkali, oil, moisture, abrasion, gasoline, and flame
• Made in the USA

Technical Specifications

• Brand: Pacer
• SKU: PACER-WUL16BK-100
• Base Part Number: WUL16
• Product Type: Primary marine wire
• Wire Gauge: 16 AWG
• Color: Black
• Length: 100 ft
• Conductor Stranding: 26/0.0100
• Conductor Material: Annealed finely stranded tinned copper
• Conductor Standard: ASTM B172 Class K
• Nominal Insulation Thickness: 0.032 in
• Nominal Cable Outside Diameter: 0.125 in
• Nominal Circular Mils: 2600
• Approximate Weight: 14.8 lb/M
• Insulation: Flexible, color-coded PVC
• Insulation Temperature Range: -20°C to 105°C
• Voltage Rating: 600 V
• Temperature Rating: 105°C dry, 75°C wet
• UL Rating: UL Standard 1426 BC-5W2
• Construction Compliance: UL Standard 1426 BC-5W2, UL AWM 1015/1230, RoHS, ABYC E-11.15, Coast Guard 33 CFR Part 183.401
• Standard Put-Ups for WUL16: 100 ft, 250 ft, 500 ft, 1000 ft

Applications

• Point-to-point wiring
• Internal wiring of panels
• Internal wiring of motors
• Marine electrical panels
• Boat accessory wiring
• DC branch circuits
• Instrument and control wiring
• Lighting and electronics wiring where 16 AWG is appropriate

Ideal For

• Boat builders
• Marine electricians
• RV electrical installers
• Boat owners repairing or upgrading wiring
• Panel builders
• Marine accessory installations
• Installations requiring a 100 ft spool of black 16 AWG tinned copper primary wire

System Compatibility

• Suitable for marine electrical systems requiring 16 AWG primary wire
• Suitable for 600 V rated wire applications
• Suitable for installations requiring tinned copper marine-grade conductors
• Suitable for point-to-point and internal wiring of panels and motors
• Suitable for systems requiring UL 1426 BC-5W2, UL AWM 1015/1230, RoHS, ABYC E-11.15, and Coast Guard compliant wire

Check Before Ordering

• Confirm that 16 AWG wire is correct for your circuit amperage, voltage, and wire run length.
• Confirm black is the correct color for your wiring plan.
• Confirm the 100 ft spool length is enough for the full project, including routing, bends, and service loops.
• Verify that the 0.125 in nominal outside diameter will fit through your wire loom, conduit, panel openings, and bulkhead penetrations.
• Use properly sized marine-rated terminals, connectors, heat shrink, and circuit protection.
• Follow applicable ABYC, UL, Coast Guard, and local electrical requirements.